Chinese translation for "strength, impact"
|
- 抗冲击强度
Related Translations:
- Example Sentences:
| 1. | Excellent mechanical strength , impact - resisting , and non - cracking
特优的机械强度，耐冲击不易破裂 | | 2. | The closed bomb test is performed , and the power strength , impact sensitivity , flash point are tested
进行了密闭爆发器实验，测试了火药力、撞击感度和爆发点等性能。 | | 3. | When nanosize caco3 dispersed in the epoxy base , effect of nanosize caco3 on working performance was good , on bond strength , impact strength and heat distortion property were very good . combination of nanosize sio _ 2 and nanosize caco3 were able to engender combination effect , the working performance and bond strength were increased evidence
研究结果表明,纳米sio _ 2能显著改善结构胶的工作性能,粘接性能、冲击性能和热变形性能有很大程度的提高;纳米caco3对结构胶的工作性能有一定改善,粘接性能和热变形性能有很大提高。 | | 4. | The following results are achieved : ( 1 ) in accordance with the empirical electron theory of solids and molecules , considering the number of covalent bond pairs on the strongest bond in a segregation structure na , the elements for matrix - strengthening can be chosen . ( 2 ) on the basis of the available phase - equilibrium thermodynamics calculation of alloy system and phase diagrams , which have been worked out , the contents of alloy elements can be identified with reference to the types , quantity and phase - transformation of carbides . ( 3 ) both the values relating to toughness ( including bending strength , yield strength , impact value of unnotched samples ) and hardness of new dm9 die steel are higher than those of crl2mov die steel
结果得出： ( 1 )根据固体与分子经验电子理论，利用偏聚结构单元的最强共价键上的共用电子对数n _ a ，可以选择工模具钢基体相的强化元素； ( 2 )根据合金系相平衡热力学计算及已有的相图，可以碳化物类型、数量及其相变确定合金元素含量； ( 3 )新型dm9钢在强韧性(抗弯强度、屈服强度、无缺口冲击值)和硬度方面均高于cr12mov钢； ( 4 )以dm9钢与6crw2si 、 7cr2wmovsi ( dm7 ) 、 h13和cr12mov四种模具钢的实验比较，进一步验证了上述冷作模具钢合金设计方案是合适的。 | | 5. | Experiment results show that , with the increase of frequency and swing , the dispersing , physical and flame retardant performances are improved greatly , tension strength , impact strength and oxygen index have increased about 32 % , 39 % and 10 % , and finally arrive a steady value
实验结果表明：随着振动频率和振幅的增加，无机阻燃剂的分散性能、制品的力学性能和阻燃性能也会相应增加，拉伸强度、冲击强度和氧指数可分别提高约32 % ， 39 %和10 % ，但其增加的速度是逐渐减少的，并最终达到一个稳定值。 | | 6. | The essay researched the compressive strength , bending strength , impact resistance and abrasion resistance of high strength polypropylene fibermesh concrete the mechanism of enhancing the properties of high strengh poloypropylence fibemesh road concrete composite was discussed and analyzed the regression on tensile strengh with portland cement mixed with fiber was derived using experiment the tensile strength of fiber soil stablization with porland cement was increased with dosage and length of fiber while the former was more effective than the latter test and analysis results indicate that polypropylene fiber can not only reinforce the strength of concrete , but also obviously promote the flexural fatigue life by the great stress the application of polypropylence fiber reinforced concrete in pavement construcion are also introduced
文章研究了不同掺量有机纤维混凝土的抗压、抗折强度、抗冲及性能、疲劳性能及耐磨性等各种路用性能，综合论述了有机纤维对水泥混凝土路用性能的影响。通过试验阐述了纤维水泥混凝土各种路用性能与纤维掺量、长度间的关系。分析表明纤维水泥混凝土随着纤维掺量和长度增加而增加，且纤维掺量对纤维混凝土抗拉强度的影响比纤维长度的影响更大。 | | 7. | Effect law of different materials on the properties of structural adhesive were studied and the modifying mechanism was discussed by microcosmic testing method . results showed that , when nanosize sio _ 2 dispersed in the epoxy base , effect of nanosize sio _ 2 on working performance was changed obviously , on bond strength , impact strength and heat distortion property were good
论文通过纳米二氧化硅、纳米碳酸钙和有机蒙脱土三种纳米材料对常用的环氧树脂建筑结构胶进行改性,研究了不同纳米材料对结构胶的性能的影响规律并通过微观测试手段对其改性机理进行了探讨。 | | 8. | Based on the characteristics of silicon whisker , the research on the modification of pa6 by silicon whisker sio2 - jx was made , and the result showed that the tensile strength , impact strength , brinell hardness , and heat resistance increased with the increase of the content of the whisker ; sio2 - jx could replace short glass fiber in the modification of pa6 , improving the heat distortion temperature , removing the appearance of glass fiber , reducing shrinkage and the cost
摘要利用晶须矽纤维状的特性，对其填充于龙玻纤改性进行研究，结果表明，随晶须用量的增加，材料的拉伸强度、冲击强度，布氏硬度、耐热温度均得到提高；晶须矽可取代短玻纤使用，提高热变形温度、消除玻纤外露，降低收缩率及生产成本等。 |
- Similar Words：
- "strength under sustained load" Chinese translation, "strength unit" Chinese translation, "strength value" Chinese translation, "strength weld" Chinese translation, "strength, flexural" Chinese translation, "strength, insulating" Chinese translation, "strength, mechanical" Chinese translation, "strength, peel" Chinese translation, "strength-concealing plays" Chinese translation, "strength-deformation characteristic" Chinese translation
|
|
|
